Advanced design unified with the main cab form creates high-quality image.

	Installation Time:1.8H　Weight:45.0kg Material:Body:Resin（ABS）/Angle:Steel

• *Maximum Load 35 kg
• *Installation requires applying for approval for vehicle modification.

Holds equipment such as load tarps, rope, etc.

	Installation Time:1.0H　Weight:25.0kg Material:Steel

• *Maximum Load 55kg
• *When installing the Roof Carrier along with the Ladder, must need to install the Roof Carrier first.
• *Cannot be installed along with Chromed Roof-side Grip.

This multi stay is convenient when installing rotating lights,
Electrical Signboards, or Fluorescent Signboards.

	For mounting Signboard Installation Time:0.8H　Weight:7.1kg Material:Bar:Aluminum/Other:Steel
	For mounting rotating lights Installation Time:0.8H　Weight:7.6kg Material:Bar:Aluminum/Other:Steel

• *Cannot be equipped along with Air Deflector (Type-G/Type-B),
  Roof Carriers, Roof Racks, or Chromed Roof Side Grips.
• *Up to two rotating lights can be installed.
• *The Signboard in this picture is sold separately.

This signboard helps to increase daytime and nighttime on-road visibility.
Your company name, etc. can be printed on it.

	Large Installation Time:1.0H　Weight:3.8kg Small Installation Time:1.0H　Weight:2.4kg

• *Costs for adding text are not included
• *Additional connector 2P is required.

This fluorescent-type Signboard helps to increase daytime and nighttime on-road visibility.
Your company name, etc. can be printed on it.

	Large Installation Time:1.0H　Weight:3.8kg Small Installation Time:1.0H　Weight:2.4kg

• *Costs for adding text are not included
• *The lights may generate noise in some regions.
• *Additional connector 2P is required.

This signboard has a new LED-based design.
Your company name, etc. can be printed on it.

	Large Installation Time:1.0H　Weight:2.9kg Small Installation Time:1.0H　Weight:2.3kg

• *Costs for adding text are not included
• *Additional connector 2P is required.

Your company name, etc. can be printed on it. It uses an Electric Luminous based light source.

	Installation Time:1.0H　Weight:0.3kg

• *Costs for adding text are not included
• *Additional connector 2P is required.
• *Installation kit (sold separately; installation time 0.3 hours) required when installing on roof carrier.
• *Installation requires enough surface area to accommodate the signboard size.

This visor cuts down on direct sunlight to the front of the cab, and it also helps prevent window frost. It can be installed along with an Air Deflector and gives the cab a stylish touch.

	Installation Time:1.8H　Weight:11.5kg

This visor cuts down on direct sunlight to the front of the cab, and it also helps prevent window frost. The tough, long-lasting stainless steel features excellent rust resistance.

	Installation Time:1.3H　Weight:19.2kg

• *Cannot be equipped along with an Air Deflector.

Allow windows to be opened for ventilation even in rainy weather. The functional design gives a sense of integration with the cab.
Design for pillar mirror type.

	Installation Time:0.7H　Weight: 0.7kg

Allow windows to be opened for ventilation even in rainy weather. The functional design gives a sense of integration with the cab. Design for pillar mirror type.

	Installation Time:0.7H　Weight: 0.9kg

• *The color is kept light to maintain passenger side visibility.

Allow windows to be opened for ventilation even in rainy weather.
The stainless steel design gives it a sharp look.

	Installation Time:0.7H　Weight: 0.5kg

This stainless type ladder features steps with anti-slip surfaces that flip up and reflective tapes for improved safety.

	1unit　Installation Time:0.6H　Weight:7.5kg

• *Cannot be equipped along with Air Deflector Type-G or G Cargo fixed Air Deflector.
• *The first and second steps are moveable.
• *Maximum Load 150kg

This Chromed Roof Side Grip is useful for loading and unloading luggage from the Roof Carrier and for cleaning the cab roof.

	Installation Time:0.5H Material:Steel

• *This Chromed Roof Side Grip can be used on both sides of the cab.
  Cannot be equipped along with Air Deflector, Roof Rack, Ladder, or Front Visor.

These films cuts down on infrared light from the sun, preventing the interior temperature from increasing, especially during summer. This allows for the effective use of the air conditioner. It also blocks the view from outside the vehicle, helping to maintain privacy.

	Installation Time:0.8H

This screen window is a convenient way to keep bugs out of your cab.
It can also be used as a sunshade.

• *Cannot be used while driving.

Installing these Mud Flaps on the rear-wheel fender prevents mud and water being slung onto following vehicles.

	1unit　Installation Time:0.4H　Weight:1.0kg Material:EVA Size: W600mm x H900mm

Installing these Mud Flaps on the rear-wheel fender prevents mud and water being slung onto following vehicles.

	1unit　Installation Time:0.4H　Weight:1.0kg Material:EVA Size: W600mm x H900mm

Installing these Mud Flaps on the rear-wheel fender prevents mud and water being slung onto following vehicles.

	1unit　Installation Time:0.4H　Weight:0.5kg Material:EVA Size: W570mm x H450mm

This stay keeps the mud flap from turning up in the wind.
The color of the plating gives the rear view of the truck a tighter look.

	Stainless type １unit　 Installation Time:0.6H　Weight:1.4kg Chromed type １unit　 Installation Time:0.6H　Weight:1.4kg

This support device makes it easier to open and close your truck bed walls.
It allows you to open and close your truck bed walls easily with one hand.

	variations are available

• *Installation time varies based on vehicle modification specifications.

This support device makes it easier to open and close your truck bed walls.
It allows you to open and close your truck bed walls easily with one hand.

	variations are available

• *Installation time varies based on vehicle modification specifications.

This locking-type fuel tank cap prevents fuel theft and tampering with the fuel tank.

	84mm

• *For Tokyo Radiator tanks.

This locking-type fuel tank cap prevents fuel theft and tampering with the fuel tank.

	100mm

• *For Hoei steel tanks.

This locking-type fuel tank cap prevents fuel theft and tampering with the fuel tank.

	80mm

• *For Hoei aluminum tanks.

This Urea Tank Cap with Keys prevents theft and tampering with the urea tank.

• *For vehicles with urea tanks (vehicles with 6H-* engines).

This prevents earth and sand from scattering while on the road. It can be opened and closed automatically from the driver’s seat.

	variations are available Installation Time:*

• *Installation time varies based on vehicle modification specifications.

This Working Light is useful when working in the truck bed at night or during early mornings.

	Installation Time:0.7H

This Removable Working Light provides extra light for working in the truck bed at night or during early mornings.
It has a magnetic design that allows it to be placed anywhere.

	24V　Installation Time:0.6H

• *Removable working light harness kit is required.

This box stores the Air Suspension Control Switch.

	Installation Time:*　Weight:1.5kg

• *For vehicles with air suspensions.
• *Remote control harness required.
• *Installation time varies based on installation location and vehicle modification specifications.

Both push-type and seesaw-type switches are available.
Fits in the vehicle's switch space.

	Push-type Installation Time:* Seesaw-type Installation Time:*

• *ISUZU Relay and harness required.
• *Installation time varies based on installation location and vehicle modification specifications.

Deluxe Tool Set stored in a steel case.
Confident in daily inspections and unprepared emergencies.

• Contents: Steel case, set of six open-end wrenches, pliers 150, crescent wrench 200, Phillips screwdriver 150, flat head screwdriver 150, Torx wrench T25, Torx wrench T30, Torx wrench T40, Torx wrench T50, box wrench 17x19, sliding T-handle, universal socket, inspection hammer